Built by an inspector · Australia-wide

A new standard for pressure equipment inspection.

Independent statutory and compliance inspection of your pressure vessels, boilers, piping and pressure safety devices, to AS/NZS 3788 and your state's requirements. Every job also comes with an interactive 3D model of your asset and a free home for its compliance history.

Get a quoteSee a live 3D scan
AICIP In-Service InspectorAPI 510 / 570 / 580 certifiedCASA-licensed drone pilotFully insured

// See it in action

Every finding, pinned on a real 3D scan

A real vessel scan, captured on the ground during an inspection. Fly through it and watch each finding stay pinned exactly where it is on the asset. This is the live, interactive record you keep in Speqo.

1Nameplate
2Original Coating / Local Pitting
3Isolated Coating Failure
4Loose Bolting
5Corroded Bolting
6CML-05: 1.0mm
Live 3D model · 6 findings pinnedLPG-1075 · Illustrative demo · real 3D scan with sample findings.
CriticalMajorMinorInfo

// The Speqo difference

More than an inspection checkbox: a full-lifecycle view of your asset.

Most inspections end with a PDF in a drawer. Speqo turns the job into a living record: a 3D model you can explore, every document filed against the asset, and reminders that fire before the next inspection falls due. And the platform itself is free to access, forever. Your 3D models, documents and history stay live for the life of the asset, at no ongoing cost.

  1. Inspect

    A licensed inspection on site, to AS/NZS 3788 and your state/territory requirements.

  2. Capture

    An interactive 3D model of the asset, with findings pinned exactly where we found them.

  3. Keep

    Documents, history and due-dates that stay with the asset for life. Free.

// What we inspect

Statutory & compliance inspection, done properly

Independent inspection across the full life of your pressure equipment: vessels, boilers, piping and pressure safety devices, external and internal, to AS/NZS 3788 and the applicable state/territory requirements.

Internal & External Pressure Vessel Inspection

Statutory and compliance inspection of in-service pressure vessels, internal and external, to AS/NZS 3788 and the applicable state/territory requirements, keeping plant compliant and safe to operate.

  • All vessel types: heat exchangers, air coolers, towers & columns, scrubbers, drums, separators and air receivers, plus water-tube, fire-tube and waste-heat (HRSG) boilers, fired heaters and furnaces
  • External and internal visual, wall-thickness and damage-mechanism review; corrosion, coating and integrity assessment
  • Inspection intervals and reporting aligned to AS/NZS 3788
  • Findings tied to fitness-for-service and remaining-life decisions

Process & Utility Piping Inspection

Statutory and compliance inspection of process and utility pressure piping to AS/NZS 3788 and the applicable state/territory requirements.

  • Process and utility piping circuits and condition-monitoring locations
  • Corrosion-under-insulation (CUI) screening
  • Support, dead-leg and injection-point assessment
  • Records structured for ongoing integrity management

Pressure Safety Devices

Statutory inspection and management of pressure safety devices, including relief and safety valves: set-pressure testing and recertification through our accredited partner network.

  • Pressure relief and safety valves (PRVs / PSVs)
  • Set-pressure (pop) testing and recertification via accredited partners
  • Register, tagging and due-date tracking
  • Test intervals aligned to your inspection program

Inspection Planning & Consultation

Planning and consultation that keep your inspection program on track and defensible.

  • Inspection planning for shutdowns, outages and turnarounds
  • Inspection consultation to support your inspection program, time-based or RBI
Explore all inspection services

// Included with every inspection · the 3D deliverable

Walk away with a true-to-life 3D model of your asset.*

Every inspection includes a true-to-life, interactive 3D model of your asset you can spin around and explore from your desk. Findings are pinned exactly where we found them, and your past inspections can be loaded on too, so the asset's full history lives in one place, on a timeline you can scrub through. The model is hosted in Speqo for the life of the asset.

Captured with the right tool for the job

We choose the capture method that suits the asset, not just drones. Each scan is individually scoped per asset and limited by safe access.

Enterprise drone

Large, elevated and hard-to-access assets. High-zoom photogrammetry mapping from the air.

Handheld 3D scanner

Small objects and components captured in fine, measurement-grade detail.

Photogrammetry

Medium vessels, and anywhere a drone can't fly, reconstructed from high-resolution photos.

// Free for owners

Your asset's home base — free, forever.

Inspection or not, your equipment lives in Speqo. Free to use as your system of record, so the data lock-in works for you, not a filing cabinet.

Equipment register

Free

Every vessel, tank and piping circuit in one place: design data, nameplate details and status, structured to AS/NZS 3788.

Document repository

Free

Design data, certificates, NDT and repair records, versioned and filed against the asset, never lost in an inbox.

Due-date reminders

Free

Automatic reminders before each inspection falls due, so compliance dates never quietly slip.

3D scan hosting

Free

Your interactive 3D models, hosted for the life of the asset and shareable with your team.

// Security & privacy

Your data is private, protected and yours

Everything you keep in Speqo (your documents, reports and 3D models) is encrypted and guarded by strict access controls. Your company's records are kept completely separate from every other organisation's, so only you and the people you invite can ever see them. We treat your inspection history with the seriousness it deserves: private, secure, and always under your control.

Mathew Jardim, AICIP In-Service Inspector of Pressure Equipment

Mathew Jardim

AICIP In-Service Inspector of Pressure Equipment

// Built by an inspector

Every inspection is carried out personally by a licensed in-service inspector with 15 years across oil & gas, mining, refining and rail, on both the owner and contractor side. Your records stand up to regulator and insurer scrutiny.

  • AICIP In-Service Inspector
  • API 510 / 570 / 580 certified
  • CASA-licensed drone pilot
Fully insured · ABN 44 232 790 205Meet the inspector

// FAQ

Common questions

Statutory and compliance inspections across the four main categories: pressure vessels (heat exchangers, air coolers, towers, scrubbers, drums, separators and air receivers), boilers and fired equipment, process and utility piping, and pressure safety devices. All work is performed to AS/NZS 3788 and the applicable state and territory requirements, with reports citing the relevant clauses so your records are audit-ready for regulators and insurers. We can also supplement an inspection through our network of certified NDT partners. Based in Melbourne, servicing Australia-wide.

// Explore more

More from Speqo

Book an inspection. Keep the asset for life.

Licensed pressure-equipment inspection, Melbourne-based, servicing Australia-wide, plus a free home for your equipment that stays useful long after the report lands.

Get a quoteGet a free assessment→
0493 928 187mat@speqo.io