Sydney, New South Wales

Pressure equipment inspection in Sydney

In-service inspection to AS/NZS 3788 for Sydney and NSW sites — with a complimentary 3D model of the asset. Serviced by arrangement.

Get a quote Get a free assessment

In New South Wales, hazard-level A, B and C pressure equipment must be item-registered, and registration generally requires a “safe-to-operate” statement from a competent person who has inspected it — so registration itself compels inspection, and ongoing in-service inspection follows to AS/NZS 3788.

Speqo is Melbourne-based and mobile; the inspector travels for scoped work and shutdowns. Sydney and NSW sites are serviced by arrangement, with the same deliverable: inspection by the certified inspector, a code-referenced report, and a complimentary interactive 3D model of the asset in a free platform.

Interstate work is quoted per job with travel accounted for, and suits scoped or shutdown-window engagements — a single vessel, a drone tank survey, or overflow — rather than short-notice call-outs.

// Areas served

Sydney metro
Newcastle & Hunter
Wollongong & Illawarra
Wider NSW (by arrangement)

// What we inspect

Pressure equipment inspection in Sydney

Statutory and compliance inspection across vessels, piping and relief devices — external and internal — to AS/NZS 3788 and the applicable state/territory requirements, with a complimentary 3D model of your asset.

Internal & External Pressure Vessel Inspection

Statutory and compliance inspection of in-service pressure vessels, internal and external, to AS/NZS 3788 and the applicable state/territory requirements, keeping plant compliant and safe to operate.

All vessel types: heat exchangers, air coolers, towers & columns, scrubbers, drums, separators, air receivers and boilers
External and internal visual, wall-thickness and damage-mechanism review; corrosion, coating and integrity assessment
Inspection intervals and reporting aligned to AS/NZS 3788
Findings tied to fitness-for-service and remaining-life decisions

Process & Utility Piping Inspection

Statutory and compliance inspection of process and utility pressure piping to AS/NZS 3788 and the applicable state/territory requirements.

Process and utility piping circuits and condition-monitoring locations
Corrosion-under-insulation (CUI) screening
Support, dead-leg and injection-point assessment
Records structured for ongoing integrity management

Pressure Relieving Devices

Statutory inspection and management of pressure relief valves and safety devices: set-pressure testing and recertification through our accredited partner network.

Pressure relief and safety valves (PRVs / PSVs)
Set-pressure (pop) testing and recertification via accredited partners
Register, tagging and due-date tracking
Test intervals aligned to your inspection program

Inspection Planning & Consultation

Planning and consultation that keep your inspection program on track and defensible.

Inspection planning for shutdowns, outages and turnarounds
Inspection consultation to support your inspection program, time-based or RBI

// Read next

Understand your obligations

See the full service detail on the services page.

// Get started

Get a quote

Tell us about your equipment and we'll come back with a clear, scoped quote — including your complimentary 3D model. Prefer to talk? Reach Mathew Jardim directly.

Call0493 928 187 Emailmat@speqo.io

Fast response — quotes typically within one business day.