Melbourne, Victoria

Pressure equipment inspection in Melbourne

Statutory in-service inspection of vessels, boilers, air receivers and piping — done by a certified AICIP inspector, with a complimentary 3D model of your asset.

Get a quote Get a free assessment

If you run pressure equipment in Melbourne — a boiler, an air receiver, a pressure vessel — you have a standing duty under Victoria's occupational health and safety obligations to have it inspected by a competent person and to keep the records. There is no renewal notice chasing you; the obligation is ongoing, and it is on the equipment's owner to manage.

Speqo does that inspection to AS/NZS 3788, with a report that cites the governing clause and page so your records are audit-ready. Every inspection also leaves you with an interactive 3D model of the asset, findings pinned where they were found, and a free platform that keeps your register, documents and due-date reminders in one place.

Melbourne holds Australia's largest food-and-beverage manufacturing base — breweries, dairies and food plants that are boiler- and steam-heavy — alongside dense industrial clusters through Dandenong South, Laverton, Altona and Campbellfield. All of it runs registered pressure equipment that has to be periodically inspected in service.

// Areas served

Melbourne CBD & inner
Dandenong South
Laverton & Altona
Campbellfield & Somerton
Keysborough & Hallam
Scoresby & Bayswater
Western & Northern suburbs

// What we inspect

Pressure equipment inspection in Melbourne

Statutory and compliance inspection across vessels, piping and relief devices — external and internal — to AS/NZS 3788 and the applicable state/territory requirements, with a complimentary 3D model of your asset.

Internal & External Pressure Vessel Inspection

Statutory and compliance inspection of in-service pressure vessels, internal and external, to AS/NZS 3788 and the applicable state/territory requirements, keeping plant compliant and safe to operate.

All vessel types: heat exchangers, air coolers, towers & columns, scrubbers, drums, separators, air receivers and boilers
External and internal visual, wall-thickness and damage-mechanism review; corrosion, coating and integrity assessment
Inspection intervals and reporting aligned to AS/NZS 3788
Findings tied to fitness-for-service and remaining-life decisions

Process & Utility Piping Inspection

Statutory and compliance inspection of process and utility pressure piping to AS/NZS 3788 and the applicable state/territory requirements.

Process and utility piping circuits and condition-monitoring locations
Corrosion-under-insulation (CUI) screening
Support, dead-leg and injection-point assessment
Records structured for ongoing integrity management

Pressure Relieving Devices

Statutory inspection and management of pressure relief valves and safety devices: set-pressure testing and recertification through our accredited partner network.

Pressure relief and safety valves (PRVs / PSVs)
Set-pressure (pop) testing and recertification via accredited partners
Register, tagging and due-date tracking
Test intervals aligned to your inspection program

Inspection Planning & Consultation

Planning and consultation that keep your inspection program on track and defensible.

Inspection planning for shutdowns, outages and turnarounds
Inspection consultation to support your inspection program, time-based or RBI

// Read next

Understand your obligations

See the full service detail on the services page.

// Get started

Get a quote

Tell us about your equipment and we'll come back with a clear, scoped quote — including your complimentary 3D model. Prefer to talk? Reach Mathew Jardim directly.

Call0493 928 187 Emailmat@speqo.io

Fast response — quotes typically within one business day.